A teleoperated robot is little more than a human worker with extra steps. (And an expensive, clumsy human worker at that.) I can't imagine many situations where that would make sense instead of having a human do the work in person.
I could see teleoperated help catching on. Americans are weird about staff. When I visit my old-world family, it's seen as perfectly normal to have someone living in an attached apartment, handling the cooking the cleaning, etc. There are well-established etiquette rules, understood both by the staff and the family, which help navigate the rather complicated, radically unequal relationship between the two.
Americans by and large don't do that. We software developers have not that different of an income gap between us and minimum wage workers compared to my family overseas and their staff. Yet, it would be considered weird, extravagant even, for a $300-500k/yr developer to have dedicated help. We're far more comfortable with people we don't need to interact with directly, like housecleaners, landscapers, etc.
Teleoperated robots sidestep that discomfort, somewhat, by obscuring the the humanity of the staff. It's probably not a particularly ethical basis for a product, but when has that ever stopped us.
Maybe you can scale to have one operator operate ten or a hundred household robots at a time.
An autonomous robot that has 99% reliability, getting stuck once an hour, is useless to me. A semi-autonomous robot that gets stuck once an hour but can be rescued by the remote operator is tempting.
Expect security and privacy in the marketing for these things, too, but I don't think that's a real differentiator. Rich and middle class people alike are currently OK with letting barely-vetted strangers in their houses for cleaning the world over.
- Services like maids or cleaners are usually scheduled, maybe you have to wait and open the door etc. Maybe they can't make it that day because of snow storm etc.
- Services are normally limited to certain hours. With a remote operator, the robot could do laundry all night ran by someone in a different time zone.
- If needed could be operated in shifts.
- Other new use cases could arise, e.g. wellness check on elderly, help if fallen or locked out etc.
Low duty cycle. If one human can drive 20 robots, because most of them are sitting still most of The time, it starts to make sense. Vs a maid or butler that can obviously only really work one home at a time.
The person in a third world country is not a slave, they're doing the job for a few bucks a day because it's still better than other options available to them.
What is the difference between being a teleoperator in India for a californian family robot, and being a software dev for a company selling SaaS products to the US market?
Yeah but with a teleoperated worker you can have them work remote from a place with poor labor regulations and extremely low pay.
The future with this as a reality is a really dark place, where the uber wealthy live entirely disconnected from the working class except through telepresent machines half a planet away. That way the wealthy don't have to be inconvenienced by the humanity of the poors.
Probably because they got rid of it when the XT came out, so it was only there for (a few months under) 2 years. But it was a good trade; removing the cassette port gave enough area on the PCB for 3 more ISA slots.
I have made the mistake of calling the early PC 8-bit, lolol...
Yes, it reminds me of an Apple ][ computer, with the major difference being the Apple had the video sub-system on board, and the PC locating that on a card.
I often wonder how things might have played out had the Apple ][ computers used one slot for video... or, had IBM chose to do it the Apple way.
Apple computers all sort of gravitated to the onvoard video despite a few cards being made. It was just enough, especially when the later models included 80 column text.
I ran my first PC on a TV. Same as the Apple and Atari machines.
Way, way back when, you were lucky to get a serial port built in to the motherboard. everything was an add-in card. But you did get a tape drive interface. It was just an audio jack you plugged into any cassette player. You had to start and stop the tape yourself, of course.
Those aren't rare on 16-bit or less, '80s and before, pre-MS-DOS home computers. Looks cool, but apparently it was way too slow and painful to be fondly remembered.
People keep saying that prices of panels keep falling, and yet any time I look at getting panels on my roof the price is the same $3/W it has been for 10 years already.
The prices are falling at the source, but free trade was never real; and it's even less so today. By the time these panels reach your roof, all kinds of fees and taxes have been tacked on. You'll be paying the maximal extractable amount.
I really don't get the Greenland thing. Is there some 4D chess reason for it? The US already has military bases there and could probably have as many more as they wanted if they just asked nicely. So the whole security thing is a pretext
If they want mineral rights those will be arranged easily with basic diplomacy and investment. They had 17 military bases there during the Cold War and that contract stands. Greenland is under NATO article 5 protection. There is no rational net-positive reason for this no matter what dimension you look in
IMO the reason is that he is a senile old man lashing out at the world. I really don't think there's a lot to it beyond that. Everyone else goes along with it because they know the administration's entire legitimacy comes from Trump and if/when he's gone the whole house of cards will collapse. That or they have their own focuses (e.g. Stephen Miller) and are happy for Greenland to be a distraction while they get on with their own stuff.
No one's really put out a strong case for it like that. You could argue it's a lot of land that's underpopulated and might be valuable in twenty years with global warming or something?
But the simpler answer is that Trump seems to personally like the idea of adding a big landmass to the US for ego reasons. He talked about it last term too with the same excuses mostly.
Curious what your techniques are to keep the angle consistent. I've been sharpening manually by always using the same thumb position under the blade but there is always a little wiggle that bugs me.
We saw stoves/fireplaces like this in a bunch of taverns in Slovenia. Huge hulking tiled cubes around the center of the building that just radiated a pleasant heat from every square inch of the surface. I imagine it was quite efficient, with just a very low fire burning to keep it in equilibrium.
If it was a rocket stove, it was a very small very hot fire. I've had a bit of a love affair with rocket stoves lately (even replaced my BBQ/grill with one).
I've had the opposite problem with laptops. There's like 3 different menus to configure sleep-on-idle but none of them actually let you disable it even if they claim they do.
They don't even share the same state and can be set to conflicting values, with the oldest looking one usually taking priority.
Disabling screen timeout is even worse since there's additionally the screensaver settings to muddy the waters.
reply