ultimately it's hard to prescribe the "definitive" amiga experience in 2025 to a total newbie. At a surface level, for many people, amiga ownership was simply a console like experience -> Buy an amiga 500, and shovel game disks into it, play game, turn it off. Replicating that is super easy with either just a raspberry pi and the PiMiga distro (see the Chris Edwards youtube channel for details) or even retropie comes with support for amiga OOTB however it comes with the caveat of having a little background knowledge of the hardware combinations available. The ABSOLUTE easiest way of getting a taste of amiga is to get hold of a "The A500" mini console which comes with pre-packaged games (but also lets you run your own once you've got to the end of enjoying the 30 or so pack-ins).

There is the WinUAE emulator for windows that's excellent (so good, you can use it to prep real-world Hard drives for actual physical amigas) but it's complicated without prior knowledge of the OG hardware combinations.

The most common setup back in the day (for UKers playing games at least) was an OG Amiga 500 with OCS (Original Chip Set) with 0.5MB RAM(ChipRAM - essentially shared system and graphics memory) and maybe an optional extra 0.5 MB upgrade (FastRAM - CPU only memory, though often known now as SlowRAM because it was directly accessable by the CPU only but had to share the bus with the chip RAM) and 1.3 Kickstart ROM.

This was later upgraded by the A500+ which came with ECS (Enhanced Chip Set) which gave a few added graphical modes, 1MB of Chip RAM (typically upgradable to +1MB fast RAM) and kickstart 2.0. it broke compatibility with some games and was a min spec for others.

This was replaced directly by the A1200 which came with an upgraded CPU (68020ec at 14 MHz) AGA chipset (16.7 mil colour palette, 256 on screen), internal IDE interface and kickstart 3.0 with 2MB ChipRAM out of the box.

The A500+ was also indirectly replaced with the A600. Essentially a A500+ mini - they updated the manuafcturing to surface mount, reduced the PCB size significantly and removed the numberpad from the keyboard and added the IDE interface from the A1200. it was supposed to be a cost reduced version but initially cost more to make than the outgoing A500+. It was hated at the time because it cost more at retail and had less features (lack of keypad broke a lot of software, IDE interface wasn't seen as beneficial at the time and the side expansion port was replaced by a PCMCIA port which again only had much more expensive peripherals at the time) The rest are the "Big Box" amigas - computers with a separate keyboard from the main box case: A1000 (the OG or just "Amiga" when it launched)

A2000 - The workhorse version of thw A500 with expansion, processor,video upgrade slots.

A1500 - a UK specific cut down version of the A2000 just launched to inflict trademark damage to a sole trader startup making aftermarket cases for the A500.

A3000 - the first fully 32-bit platform - ECS and 32-bit 680x0 CPUs available (IIRC both 68020 and 68030 though might be wrong about the '020)

A4000 - a big box equivalent to the A1200 - AGA and expansion

A4000T - towerized version of A4000 - the holy grail for collectors and rare as hens teeth.

However in 2025 getting involved with the amiga scene is a huge rabbit hole as the community is so large there are always wonderful projects (such as PiStorm) for enhancing and extending the life of these now very aged machines.

Sorry, this ended up a bit of an essay on what was only supposed to be a quick note...